Industrial blowers are most commonly used to provide personnel and spot cooling in industrial and commercial buildings, where air conditioning is not feasible or is too costly. They provide appropriate ventilation for heavy-duty commercial and industrial applications including factories, warehouses, gymnasiums, underground parking, garages etc. Many of our industrial fans and industrial blowers are classified with a numerical denominations based upon the construction design of the fan.

Available in a number of configurations
• Duct fans and blowers.
• Roof and ceiling ventilators.
• Wall and panel mount fans
• Pressure and volume blowers
• Free - standing fans and plenum fans.

Our each design has been produced with lot of research & development process.
We also have different category of Industrial Blowers
• Air Blowers
• Centrifugal Blowers
• Axial Blowers
• Other Industrial Blowers.

We offer to our clients a wide range of air pollution control equipments, which helps in successfully eliminating a wide range of pollutants, which are known as volatile organic compounds (VOCs). Some of the compounds it is effective against include fumes, odors, gases and vapors. Based on the amount of airflow & type of VOCs being emitted, we custom develop these air pollution control systems.

Our air pollution control devices include:

• Fabric Filters: They are made from tightly woven fabric and are used to sieve flue gas and collect particulate.
• Wet scrubbers: Our venturi scrubbers are effective against acid gas & SO2 controls and feature low efficiencies for smaller particles.
• NOx controls: They help in the selective catalytic reduction which helps in controlling emissions of nitrogen oxide from stationary sources & selective non-catalytic reduction, which helps in changing oxides of nitrogen (NOx) into molecular nitrogen (N2).
• Electrostatic precipitators: It uses electrical fields for removing particulate from boiler fuel gas and utilizes grounded electrodes known as collection plates for ionizing & capturing dust particles from contaminated air.

We offer to our clients industrial fans that come with an air capacity of 2000 -108000 m3/ hr and features single fan that allows variable discharge orientations. Their efficient performance makes them improve the efficiency levels of oil & gas charged boilers and are also used for firing in boilers.

Their hard face blades further helps in the pullout of air with dust particles and enhances secondary air-flow through chimneys.

Features

• Easy maintainability.
• Low power consumption.
• Low noise.
• High efficiency.

The range of industrial fans offered by us includes:

• Centrifugal Air Handling Fans:

• Single and Double Width.
• Size to 73" wheel diameter & CFMs to 350,000.

• Axial Fans:

• Direct and Belt Drive.
• Sizes to 84" Wheel Diameter & CFMs to 300,000.

• Single Stage Pressure Blowers:

• CFMs to 90" WG, Pressures to 90" WG.

• Material Handling Fans:

• Sizes up to 85" wheel diameter.
• CFMs to 100,000, Pressures to 50" WG.

A range of Centrifugal Induced Draft Blower are available in various designs, style, configuration as well as according to customer's specific requirements, fans are prepared. Our up-to-date manufacturing capabilities and excellent design ensures effective airflow with least pressure loss. We ensure best quality to our products. Apart from providing various designs we also manufacture customized products catering the need of every customer.
The range which can be customized specifically:

•Housing
•Access Door
•Housing Drain
•Casing Split
•Fan Outlet
•Inlet Box
•Inlet Cone
•Impeller
•Liners
•Shaft Seal
•Fan Shaft
•Damper
•Bearings
•Bearing Pedestals
•Coupling
•Fan Arrangements
•Additional Accessories
•Fan Selections

The fans manufactured can be used in varied range of industries namely

•Power Generation
•Iron and Steel Making
•Cement Production
•Chemical and Petro-Chemical Processing
•Mining and Ore Processing

Roof ventilator recalculates are multi-purpose power roof ventilators.
They are suggested for use in commercial and industrial applications where there is sufficient ceiling height to create a temperature differential between the floor and ceiling.
These applications include factories, warehouses and large commercial buildings.
These Roof ventilator recalculates function as normal power roof ventilators in warmer weather and as an energy saving recirculation system in cold weather.
Each unit is equipped with a reversible fan that redistributes warm ceiling air throughout the plant and reduces the building's heating requirement. With the flip of a switch, it can function as a conventional roof ventilator.

Rotary airlocks are important components of pneumatic conveying systems. Rotary airlock is also known as rotary valve, rotary feeder or airlock feeder. The main function of a rotary valve is to control flow of bulk solids from silo, mixer, cyclone or hopper under gravity, pressure and vacuum conditions.
Application Areas

Silo Discharge:
The rotary valve placed under the silo or dust collection system is used to control the bulk solid discharge.

Dosage Control:
By controlling the rotation speed of the airlock feeder, volumetric metering and dosing of granular solids is achieved.

Pneumatic Transportation:
The airlock mounted under a cyclone is used for discharging the cyclone.

Pneumatic Transportation:
Rotary valves mounted under cyclones, silos or hoppers are used to feed the pneumatic conveying line.

The System is made up of a hot air generator which forces the hot filtered air into the hydraulic circuit.hot filtered air generator is installed to force the hot filtered air into the wash chamber.
The system supplies hot filtered air to the internal hydraulic circuits, directing the jet on the internal surfaces of the materials washed through the spigots of the trolleys of the direct injection system.The maximum temperature of the hot air is 100°C: the drying time can be adjusted from 10 to 60 minutes and the temperature from 60°C to 100°C in all the 30 programs.The Drying System is particularly efficient and quick for the drying of narrow necked glassware, round bottom flasks, bottles, conical flasks and pipettes. Thanks to the direct injection on to the internal surfaces , humidity is easily and quickly eliminated

Fresh Air Ventilation System is designed for easy installation and works with existing HVAC fan systems. It's an affordable solution to ventilation, yet it offers best-in-class benefits. The intelligent algorithm calculates the amount of ventilation needed based on simple settings for each home. This "set it and forget it" program means optimal ventilation for the homeowner.

These systems not only create over pressure inside the department to avoid dust ingress and also reduces down the temperature for comfortable working in the department.The dust extraction and collection systems made by United Airtech are widely used for various industrial applications such as material handling, crushing, pulverizing, buffing / polishing and furnaces. These systems effectively extract the dust particles generated in various processes with the help of exhaust blowers to create comfortable working environment for men and machines. The dust will be collected in a suitably designed dust collector before throwing the stale air outside the building. Our dust extraction and collection systems are ideal for core sectors such as automobile, cement, sugar, power plants and mining.

The fume extraction and scrubbing systems are designed to remove acidic fumes generated during various processes such as pickling, chrome plating, nickel plating and galvanising. The company's fume extraction and scrubbing systems are extensively used in steel, automobile, pipe manufacturing, chemical and other sectors.